Equivalents for the Denso spark plug W31ES-U
Denso W31ES-U, a spark plug — hex size 13/16″ (20,8 mm), reach 19.0 mm, thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), heat range cold. 1000 equivalents listed: interchangeable and compatible spark plugs across all brands — NGK, Bosch, Champion, Denso…
Technical information Denso W31ES-U spark plug
- Tip
- non projected
- Construction
- Standard construction
- Terminal
- Removable
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso W31ES-U — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
1000 equivalents compatible with the Denso W31ES-U spark plug
No equivalent for this brand selection.
What can replace a Denso W31ES-U spark plug?
The Denso W31ES-U is interchangeable with: NGK A6FS, Bosch M2C, Champion N1, NGK B10EG, NGK B10ES, NGK B10EV. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso W31ES-U?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Cold, Seat Flat (gasket), Tip non projected, Construction Standard construction, Terminal Removable, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.