Equivalents for the Bosch spark plug WR8DCO4
The Bosch WR8DCO4 spark plug : heat range hot, reach 18.5–21.5 mm, thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), hex size 13/16″ (20,8 mm), electrode nickel. Browse its 1000 equivalents: compatible, interchangeable and replacement spark plugs across NGK, Bosch, Champion, Denso and many more.
Technical information Bosch WR8DCO4 spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR8DCO4 — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
1000 equivalents compatible with the Bosch WR8DCO4 spark plug
No equivalent for this brand selection.
What can replace a Bosch WR8DCO4 spark plug?
The Bosch WR8DCO4 is interchangeable with: NGK BP6ES, Bosch M2C, Champion N2, NGK BPR4ES, NGK BPR6ES, NGK BCPR7ES. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR8DCO4?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.