Equivalents for the Bosch spark plug WR8DS
The Bosch WR8DS spark plug : thread 14 mm, heat range very hot, hex size 13/16″ (20,8 mm), reach 18.5–21.5 mm, electrode nickel, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour). All its 1000 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WR8DS spark plug
- Resistor
- yes
- Construction
- Silver
- Ground electrodes
- 1
- Terminal
- SAE nut 3x caulked
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR8DS — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
1000 equivalents compatible with the Bosch WR8DS spark plug
No equivalent for this brand selection.
What can replace a Bosch WR8DS spark plug?
The Bosch WR8DS is interchangeable with: NGK BP6ES, Bosch M2C, Champion N2, NGK BPR4ES, NGK BPR6ES, NGK BCPR7ES. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR8DS?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Very hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Construction Silver, Ground electrodes 1, Terminal SAE nut 3x caulked, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.