Equivalents for the Bosch spark plug WR8DPX
The Bosch WR8DPX spark plug featuring hex size 13/16″ (20,8 mm), reach 18.5–21.5 mm, thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), heat range hot, electrode platinum. Browse its 1000 equivalents: compatible, interchangeable and replacement spark plugs across NGK, Bosch, Champion, Denso and many more.
Technical information Bosch WR8DPX spark plug
- Resistor
- yes
- Construction
- Platinum+
- Ground electrodes
- 1
- Terminal
- Special design
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR8DPX — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
1000 equivalents compatible with the Bosch WR8DPX spark plug
No equivalent for this brand selection.
What can replace a Bosch WR8DPX spark plug?
The Bosch WR8DPX is interchangeable with: NGK BP6ES, Bosch M2C, Champion N2, NGK BPR4ES, NGK BPR6ES, NGK BCPR7ES. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR8DPX?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Platinum, Resistor yes, Seat Flat (gasket), Construction Platinum+, Ground electrodes 1, Terminal Special design, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.