Equivalents for the Bosch spark plug W9DCO
Bosch W9DCO is a spark plug with heat range hot, hex size 13/16″ (20,8 mm), reach 18.5–21.5 mm, electrode nickel, thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour). Find its 1000 compatible and interchangeable spark plugs: cross-references for NGK, Bosch, Champion, Denso and every brand.
Technical information Bosch W9DCO spark plug
- Resistor
- no
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch W9DCO — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
1000 equivalents compatible with the Bosch W9DCO spark plug
No equivalent for this brand selection.
What can replace a Bosch W9DCO spark plug?
The Bosch W9DCO is interchangeable with: NGK BP6ES, Bosch M2C, Champion N2, NGK BPR4ES, NGK BPR6ES, NGK BCPR7ES. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch W9DCO?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Nickel, Resistor no, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.