Equivalents for the Bosch spark plug WR7DS
The Bosch WR7DS spark plug — electrode nickel, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, hex size 13/16″ (20,8 mm), reach 18.5–21.5 mm, heat range hot. Compare its 1000 equivalents and find the cheapest compatible plug: NGK, Bosch, Champion, Denso and more.
Technical information Bosch WR7DS spark plug
- Resistor
- yes
- Construction
- Silver
- Ground electrodes
- 1
- Terminal
- SAE nut 3x caulked
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR7DS — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
1000 equivalents compatible with the Bosch WR7DS spark plug
No equivalent for this brand selection.
What can replace a Bosch WR7DS spark plug?
The Bosch WR7DS is interchangeable with: NGK BP6ES, Bosch M2C, Champion N2, NGK BPR4ES, NGK BPR6ES, NGK BCPR7ES. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR7DS?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Construction Silver, Ground electrodes 1, Terminal SAE nut 3x caulked, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.