Equivalents for the Bosch spark plug WR7D
The Bosch WR7D spark plug — hex size 13/16″ (20,8 mm), electrode nickel, heat range hot, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, reach 18.5–21.5 mm. All its 1000 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WR7D spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR7D — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
1000 equivalents compatible with the Bosch WR7D spark plug
No equivalent for this brand selection.
What can replace a Bosch WR7D spark plug?
The Bosch WR7D is interchangeable with: NGK BP6ES, Bosch M2C, Champion N2, NGK BPR4ES, NGK BPR6ES, NGK BCPR7ES. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR7D?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.