Equivalents for the Bosch spark plug W8D
Meet the Bosch W8D spark plug with reach 18.5–21.5 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, electrode nickel, hex size 13/16″ (20,8 mm), heat range hot. Browse its 1000 equivalents: compatible, interchangeable and replacement spark plugs across NGK, Bosch, Champion, Denso and many more.
Technical information Bosch W8D spark plug
- Resistor
- no
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch W8D — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
1000 equivalents compatible with the Bosch W8D spark plug
No equivalent for this brand selection.
What can replace a Bosch W8D spark plug?
The Bosch W8D is interchangeable with: NGK BP5ES, Bosch M2C, Champion N2, NGK BP6ES, NGK BPR4ES, NGK BPR6ES. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch W8D?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Nickel, Resistor no, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.