Equivalents for the Bosch spark plug W10DCX
Bosch W10DCX, a spark plug featuring thread 14 mm, hex size 13/16″ (20,8 mm), heat range hot, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), electrode nickel, reach 18.5–21.5 mm. Here are its 57 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Bosch W10DCX spark plug
- Resistor
- no
- Ground electrodes
- 1
- Terminal
- Special design
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch W10DCX — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
What can replace a Bosch W10DCX spark plug?
The Bosch W10DCX is interchangeable with: Bosch W8D, Champion N11Y, Denso W9EP, Bosch W8DC, Bosch W8DX, Bosch W8DCO. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch W10DCX?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Nickel, Resistor no, Seat Flat (gasket), Ground electrodes 1, Terminal Special design, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.