Spark plug · Champion

Equivalents for the Champion spark plug RN13LYC

Champion RN13LYC, a spark plug : hex size 13/16″ (20,8 mm), tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, electrode nickel, heat range hot, reach 19.0 mm. All its 386 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…

Technical information Champion RN13LYC spark plug

Resistor
yes
Tip
standard
Construction
Standard construction
Terminal
Solid
Torque
fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)

→ How to read a Champion reference

Buy this spark plug Champion RN13LYC — best retailers

Buy a spark plug wrench 13/16″ (20,8 mm) wrench

Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.

386 equivalents compatible with the Champion RN13LYC spark plug

Filter by brand

No equivalent for this brand selection.

What can replace a Champion RN13LYC spark plug?

The Champion RN13LYC is interchangeable with: Bosch W9D, Champion N8L, Denso K16TT, Bosch W9H, Bosch WR9, Bosch W7HC. These spark plugs share the same mounting (thread, seat) and heat range.

What are the specifications of the Champion RN13LYC?

Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Hot, Gap 5.1mm, Electrode Nickel, Resistor yes, Seat Flat (gasket), Tip standard, Construction Standard construction, Terminal Solid, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)

Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.