Equivalents for the Bosch spark plug WR8DCO
The Bosch WR8DCO spark plug with electrode nickel, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), reach 18.5–21.5 mm, thread 14 mm, hex size 13/16″ (20,8 mm), heat range hot. Find its 27 compatible and interchangeable spark plugs: cross-references for NGK, Bosch, Champion, Denso and every brand.
Technical information Bosch WR8DCO spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR8DCO — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
27 equivalents compatible with the Bosch WR8DCO spark plug
No equivalent for this brand selection.
What can replace a Bosch WR8DCO spark plug?
The Bosch WR8DCO is interchangeable with: Bosch WR8DCO4, Champion R44NS, Beru 2325700, Champion RN11C, Beru 2330701, Beru Z 8. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR8DCO?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.