Equivalents for the Bosch spark plug WR9DCXEA11
Bosch WR9DCXEA11, a spark plug : tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), heat range hot, reach 18.5–21.5 mm, electrode nickel, thread 14 mm. All its 1000 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WR9DCXEA11 spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Terminal
- Special design
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR9DCXEA11 — best retailers
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
1000 equivalents compatible with the Bosch WR9DCXEA11 spark plug
No equivalent for this brand selection.
What can replace a Bosch WR9DCXEA11 spark plug?
The Bosch WR9DCXEA11 is interchangeable with: NGK BP6ES, Bosch M2C, Champion N2, NGK BPR2E, NGK BPR4E, NGK BPR4ES. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR9DCXEA11?
Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Terminal Special design, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.