Equivalents for the Denso spark plug W34ENU
Meet the Denso W34ENU spark plug featuring reach 19.0 mm, thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), hex size 13/16″ (20,8 mm), heat range very cold. Here are its 52 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Denso W34ENU spark plug
- Resistor
- No
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso W34ENU — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
52 equivalents compatible with the Denso W34ENU spark plug
No equivalent for this brand selection.
What can replace a Denso W34ENU spark plug?
The Denso W34ENU is interchangeable with: Bosch W06CS, Champion C53R, Denso W29EN, Bosch W07CS, Bosch W08CS, Bosch WO6CS. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso W34ENU?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Very cold, Resistor No, Seat Flat (gasket), Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.