Equivalents for the Denso spark plug W31ENU
The Denso W31ENU spark plug — reach 19.0 mm, hex size 13/16″ (20,8 mm), tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, heat range very cold. Compare its 38 equivalents and find the cheapest compatible plug: NGK, Bosch, Champion, Denso and more.
Technical information Denso W31ENU spark plug
- Resistor
- No
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso W31ENU — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
38 equivalents compatible with the Denso W31ENU spark plug
No equivalent for this brand selection.
What can replace a Denso W31ENU spark plug?
The Denso W31ENU is interchangeable with: Bosch W06CS, Champion C55R, Denso W29EN, Bosch WO6CS, Bosch WO7CS, Bosch WO8CS. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso W31ENU?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Very cold, Resistor No, Seat Flat (gasket), Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.