Equivalents for the Bosch spark plug W06CS
The Bosch W06CS spark plug — tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, heat range very cold, electrode nickel, reach 18.5–21.5 mm, hex size 13/16″ (20,8 mm). Here are its 66 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Bosch W06CS spark plug
- Resistor
- no
- Ground electrodes
- 1
- Terminal
- SAE nut 3x caulked
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch W06CS — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
66 equivalents compatible with the Bosch W06CS spark plug
No equivalent for this brand selection.
What can replace a Bosch W06CS spark plug?
The Bosch W06CS is interchangeable with: Bosch W07CS, Champion C53, Denso W34EN, Champion N80, Champion C53R, Champion C55R. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch W06CS?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Very cold, Electrode Nickel, Resistor no, Seat Flat (gasket), Ground electrodes 1, Terminal SAE nut 3x caulked, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.