Equivalents for the Denso spark plug X27ETR
Denso X27ETR is an automotive spark plug : thread 12 mm, tightening torque fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour), heat range hot, reach 19.0 mm, hex size 18 mm (0,71″). 39 equivalents listed: interchangeable and compatible spark plugs across all brands — NGK, Bosch, Champion, Denso…
Technical information Denso X27ETR spark plug
- Tip
- non projected
- Construction
- 2 ground electrodes
- Terminal
- Threaded-Terminal
- Torque
- fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour)
Buy this spark plug Denso X27ETR — best retailers
Buy a spark plug wrench 18 mm (0,71″) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
39 equivalents compatible with the Denso X27ETR spark plug
No equivalent for this brand selection.
What can replace a Denso X27ETR spark plug?
The Denso X27ETR is interchangeable with: NGK J9A, Champion RAX92DC, Denso X20E, NGK J9B, NGK JR9A, NGK JR9B. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso X27ETR?
Spark plug wrench 18 mm (0,71″), Thread 12 mm, Reach 19.0 mm, Heat range Hot, Seat Flat (gasket), Tip non projected, Construction 2 ground electrodes, Terminal Threaded-Terminal, Torque fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.