Equivalents for the Denso spark plug X27EPZU
The Denso X27EPZU spark plug — heat range cold, reach 19.0 mm, thread 12 mm, tightening torque fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour), hex size 18 mm (0,71″). Find its 30 compatible and interchangeable spark plugs: cross-references for NGK, Bosch, Champion, Denso and every brand.
Technical information Denso X27EPZU spark plug
- Resistor
- No
- Tip
- Projected
- Torque
- fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour)
Buy this spark plug Denso X27EPZU — best retailers
Buy a spark plug wrench 18 mm (0,71″) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
30 equivalents compatible with the Denso X27EPZU spark plug
No equivalent for this brand selection.
What can replace a Denso X27EPZU spark plug?
The Denso X27EPZU is interchangeable with: Champion RA89, Denso X22E-U, Torch D6TC9, Champion A59GC, Champion RA6HC, Champion RA8HC. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso X27EPZU?
Spark plug wrench 18 mm (0,71″), Thread 12 mm, Reach 19.0 mm, Heat range Cold, Resistor No, Seat Flat (gasket), Tip Projected, Torque fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.