Spark plug · Denso

Equivalents for the Denso spark plug W16FPUS

Meet the Denso W16FPUS spark plug with thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), hex size 13/16″ (20,8 mm), heat range very hot. Here are its 571 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.

Technical information Denso W16FPUS spark plug

Tip
Projected
Torque
fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)

→ How to read a Denso reference

Buy this spark plug Denso W16FPUS — best retailers

Buy a spark plug wrench 13/16″ (20,8 mm) wrench

Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.

571 equivalents compatible with the Denso W16FPUS spark plug

Filter by brand

No equivalent for this brand selection.

What can replace a Denso W16FPUS spark plug?

The Denso W16FPUS is interchangeable with: NGK BPR6HS, Bosch W6BC, Champion J8CS, Bosch W7BC, Bosch W7BP, Bosch W8BC. These spark plugs share the same mounting (thread, seat) and heat range.

What are the specifications of the Denso W16FPUS?

Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Heat range Very hot, Resistor No, Seat Flat (gasket), Tip Projected, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)

Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.