Spark plug · Motorcraft

Equivalents for the Motorcraft spark plug AER32

Motorcraft AER32 is a spark plug : heat range very hot, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, resistor type (RFI-suppressed). All its 626 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…

Technical information Motorcraft AER32 spark plug

Resistor
Yes
Torque
fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)

Buy this spark plug Motorcraft AER32 — best retailers

Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.

626 equivalents compatible with the Motorcraft AER32 spark plug

Filter by brand

No equivalent for this brand selection.

What can replace a Motorcraft AER32 spark plug?

The Motorcraft AER32 is interchangeable with: NGK BPR6HS, Bosch W6BC, Champion J8CS, NGK BPR6HSA, Bosch W7BC, Bosch W7BP. These spark plugs share the same mounting (thread, seat) and heat range.

What are the specifications of the Motorcraft AER32?

Thread 14 mm, Heat range Very hot, Resistor Yes, Seat Flat (gasket), Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)

Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.