Spark plug · Bosch

Equivalents for the Bosch spark plug WR8FPY

Bosch WR8FPY is a spark plug featuring hex size 13/16″ (20,8 mm), heat range very hot, thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), electrode platinum, reach 9.5 mm. Browse its 632 equivalents: compatible, interchangeable and replacement spark plugs across NGK, Bosch, Champion, Denso and many more.

Technical information Bosch WR8FPY spark plug

Resistor
yes
Ground electrodes
1
Torque
fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)

→ How to read a Bosch reference

Buy this spark plug Bosch WR8FPY — best retailers

Buy a spark plug wrench 13/16″ (20,8 mm) wrench

Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.

632 equivalents compatible with the Bosch WR8FPY spark plug

Filter by brand

No equivalent for this brand selection.

What can replace a Bosch WR8FPY spark plug?

The Bosch WR8FPY is interchangeable with: Bosch W7E, Champion J6, Denso W14P, Bosch W7F, Bosch W8E, Bosch W8F. These spark plugs share the same mounting (thread, seat) and heat range.

What are the specifications of the Bosch WR8FPY?

Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 9.5 mm, Heat range Very hot, Gap 1.5mm, Electrode Platinum, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)

Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.