Equivalents for the Bosch spark plug WR10FC
Bosch WR10FC is an automotive spark plug with heat range hot, hex size 13/16″ (20,8 mm), tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), electrode nickel, reach 9.5 mm, thread 14 mm. Find its 291 compatible and interchangeable spark plugs: cross-references for NGK, Bosch, Champion, Denso and every brand.
Technical information Bosch WR10FC spark plug
- Resistor
- yes
- Construction
- Super
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR10FC — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
What can replace a Bosch WR10FC spark plug?
The Bosch WR10FC is interchangeable with: Bosch W7F, Champion J10Y, Denso W14P-U, Bosch W8F, Bosch W9F, Bosch W10F. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR10FC?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 9.5 mm, Heat range Hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Construction Super, Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.