Spark plug · Bosch

Equivalents for the Bosch spark plug W10EC

Meet the Bosch W10EC spark plug : heat range medium, electrode nickel, hex size 13/16″ (20,8 mm), reach 19.0–20.5 mm, thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour). All its 598 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…

Technical information Bosch W10EC spark plug

Construction
Super
Ground electrodes
1
Torque
fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)

→ How to read a Bosch reference

Buy this spark plug Bosch W10EC — best retailers

Buy a spark plug wrench 13/16″ (20,8 mm) wrench

Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.

598 equivalents compatible with the Bosch W10EC spark plug

Filter by brand

No equivalent for this brand selection.

What can replace a Bosch W10EC spark plug?

The Bosch W10EC is interchangeable with: Bosch W5E, Champion J5, Denso W31S, Bosch W7E, Bosch W8E, Bosch W8F. These spark plugs share the same mounting (thread, seat) and heat range.

What are the specifications of the Bosch W10EC?

Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0–20.5 mm, Heat range Medium, Electrode Nickel, Resistor no, Seat Flat (gasket), Construction Super, Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)

Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.