Equivalents for the Denso spark plug X31ETR
Denso X31ETR is an automotive spark plug : thread 12 mm, heat range hot, hex size 18 mm (0,71″), reach 19.0 mm, tightening torque fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour). Find its 16 compatible and interchangeable spark plugs: cross-references for NGK, Bosch, Champion, Denso and every brand.
Technical information Denso X31ETR spark plug
- Tip
- projected
- Construction
- 2 ground electrodes
- Terminal
- Threaded-Terminal
- Torque
- fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour)
Buy this spark plug Denso X31ETR — best retailers
Buy a spark plug wrench 18 mm (0,71″) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
16 equivalents compatible with the Denso X31ETR spark plug
No equivalent for this brand selection.
What can replace a Denso X31ETR spark plug?
The Denso X31ETR is interchangeable with: NGK J10A, Torch D10C, Bonon D8RTC, NGK J10B, NGK JR10B, Torch D10RC. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso X31ETR?
Spark plug wrench 18 mm (0,71″), Thread 12 mm, Reach 19.0 mm, Heat range Hot, Seat Flat (gasket), Tip projected, Construction 2 ground electrodes, Terminal Threaded-Terminal, Torque fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.