Equivalents for the Denso spark plug X31ES-U
The Denso X31ES-U spark plug : tightening torque fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour), thread 12 mm, reach 19.0 mm, heat range hot, hex size 18 mm (0,71″). Here are its 18 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Denso X31ES-U spark plug
- Tip
- non projected
- Construction
- Standard construction
- Terminal
- Threaded-Terminal
- Torque
- fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour)
Buy this spark plug Denso X31ES-U — best retailers
Buy a spark plug wrench 18 mm (0,71″) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
18 equivalents compatible with the Denso X31ES-U spark plug
No equivalent for this brand selection.
What can replace a Denso X31ES-U spark plug?
The Denso X31ES-U is interchangeable with: Champion A57C, Denso X20E, Motorcraft HG1, Champion A57G, Champion OE173, Denso X22E. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso X31ES-U?
Spark plug wrench 18 mm (0,71″), Thread 12 mm, Reach 19.0 mm, Heat range Hot, Seat Flat (gasket), Tip non projected, Construction Standard construction, Terminal Threaded-Terminal, Torque fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.