Equivalents for the Denso spark plug X17FU
Meet the Denso X17FU spark plug featuring hex size 18 mm (0,71″), heat range hot, thread 12 mm, tightening torque fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour). Here are its 15 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Denso X17FU spark plug
- Resistor
- No
- Torque
- fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour)
Buy this spark plug Denso X17FU — best retailers
Buy a spark plug wrench 18 mm (0,71″) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
15 equivalents compatible with the Denso X17FU spark plug
No equivalent for this brand selection.
What can replace a Denso X17FU spark plug?
The Denso X17FU is interchangeable with: Champion P7, Denso X24FSR, Torch C8RC, Champion P7G, Champion RP7, Champion P7014. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso X17FU?
Spark plug wrench 18 mm (0,71″), Thread 12 mm, Heat range Hot, Resistor No, Seat Flat (gasket), Torque fonte 15–25 N·m · alu 15–20 N·m — ou 180° (½ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.