Equivalents for the Denso spark plug W31ESR-ZU
Denso W31ESR-ZU is an automotive spark plug featuring hex size 13/16″ (20,8 mm), reach 19.0 mm, heat range very cold, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm. Here are its 21 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Denso W31ESR-ZU spark plug
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso W31ESR-ZU — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
21 equivalents compatible with the Denso W31ESR-ZU spark plug
No equivalent for this brand selection.
What can replace a Denso W31ESR-ZU spark plug?
The Denso W31ESR-ZU is interchangeable with: Bosch W07CS, Champion C57YC, Denso IW31, Champion C57JC4, Autolite XS4062, Motorcraft AG051. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso W31ESR-ZU?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Very cold, Seat Flat (gasket), Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.