Equivalents for the Denso spark plug W27FC
Denso W27FC, a spark plug — tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), heat range cold, hex size 13/16″ (20,8 mm), thread 14 mm. Browse its 20 equivalents: compatible, interchangeable and replacement spark plugs across NGK, Bosch, Champion, Denso and many more.
Technical information Denso W27FC spark plug
- Resistor
- No
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso W27FC — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
20 equivalents compatible with the Denso W27FC spark plug
No equivalent for this brand selection.
What can replace a Denso W27FC spark plug?
The Denso W27FC is interchangeable with: NGK B10HVX, Bosch W2AC, Champion L77JC4, NGK R5525-10, Bosch W 07 AS, Bosch W 08 AS. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso W27FC?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Heat range Cold, Resistor No, Seat Flat (gasket), Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.