Equivalents for the Denso spark plug W27EMR-C
Denso W27EMR-C is a spark plug featuring thread 14 mm, heat range cold, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), reach 19.0 mm, hex size 13/16″ (20,8 mm). All its 23 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Denso W27EMR-C spark plug
- Tip
- non projected
- Construction
- Special design
- Terminal
- Solid
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso W27EMR-C — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
23 equivalents compatible with the Denso W27EMR-C spark plug
No equivalent for this brand selection.
What can replace a Denso W27EMR-C spark plug?
The Denso W27EMR-C is interchangeable with: NGK BR9ECM, Denso IWM27, Brisk LR11S, NGK BR9ECMVX, Torch F9R-CM, Aprilia AP8600008. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso W27EMR-C?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Cold, Seat Flat (gasket), Tip non projected, Construction Special design, Terminal Solid, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.