Equivalents for the Denso spark plug W27EDR
Meet the Denso W27EDR spark plug : reach 19.0 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, hex size 13/16″ (20,8 mm), resistor type (RFI-suppressed), heat range cold. 19 equivalents listed: interchangeable and compatible spark plugs across all brands — NGK, Bosch, Champion, Denso…
Technical information Denso W27EDR spark plug
- Resistor
- Yes
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso W27EDR — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
19 equivalents compatible with the Denso W27EDR spark plug
No equivalent for this brand selection.
What can replace a Denso W27EDR spark plug?
The Denso W27EDR is interchangeable with: Denso W27EDR14, Torch F9RTQ, Mazda N20318600, Denso IRE0127, Denso IRE01-27, Mazda N24618600. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso W27EDR?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Cold, Resistor Yes, Seat Flat (gasket), Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.