Equivalents for the Denso spark plug W25EBR
The Denso W25EBR spark plug — reach 19.0 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), hex size 13/16″ (20,8 mm), heat range cold, thread 14 mm. Here are its 28 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Denso W25EBR spark plug
- Tip
- non projected
- Construction
- 3 ground electrodes
- Terminal
- Solid
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso W25EBR — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
28 equivalents compatible with the Denso W25EBR spark plug
No equivalent for this brand selection.
What can replace a Denso W25EBR spark plug?
The Denso W25EBR is interchangeable with: Bosch WR3CTC, Champion N178B, Motorcraft AG091, Champion N179BC, Champion RN179BC, Motorcraft AFR16C. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso W25EBR?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Cold, Seat Flat (gasket), Tip non projected, Construction 3 ground electrodes, Terminal Solid, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.