Equivalents for the Denso spark plug W24EMR-C
Denso W24EMR-C is a spark plug — thread 14 mm, heat range cold, hex size 13/16″ (20,8 mm), tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), reach 19.0 mm. Find its 9 compatible and interchangeable spark plugs: cross-references for NGK, Bosch, Champion, Denso and every brand.
Technical information Denso W24EMR-C spark plug
- Tip
- non projected
- Construction
- Special design
- Terminal
- Solid
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso W24EMR-C — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
9 equivalents compatible with the Denso W24EMR-C spark plug
No equivalent for this brand selection.
What can replace a Denso W24EMR-C spark plug?
The Denso W24EMR-C is interchangeable with: NGK BR8ECM, Denso IWM24, Torch F8R-CM, Denso 4198, Denso 067700-7190, Suzuki 09482-00475. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso W24EMR-C?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Cold, Seat Flat (gasket), Tip non projected, Construction Special design, Terminal Solid, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.