Equivalents for the Denso spark plug W14FPR-UL10
Denso W14FPR-UL10, a spark plug — reach 12.7 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), heat range hot, thread 14 mm, hex size 13/16″ (20,8 mm). Here are its 10 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Denso W14FPR-UL10 spark plug
- Tip
- extra projected
- Construction
- Standard construction
- Terminal
- Removable
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso W14FPR-UL10 — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
10 equivalents compatible with the Denso W14FPR-UL10 spark plug
No equivalent for this brand selection.
What can replace a Denso W14FPR-UL10 spark plug?
The Denso W14FPR-UL10 is interchangeable with: NGK BPR4HS10, Denso IWF16, Torch E4RTC-11, NGK BPR4HS-10, Denso 067700-1871, Kubota 1337567740. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso W14FPR-UL10?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 12.7 mm, Heat range Hot, Seat Flat (gasket), Tip extra projected, Construction Standard construction, Terminal Removable, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.