Equivalents for the Denso spark plug W14EXZ-U
Denso W14EXZ-U, a spark plug : reach 19.0 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, hex size 13/16″ (20,8 mm), heat range very hot. Here are its 36 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Denso W14EXZ-U spark plug
- Resistor
- No
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso W14EXZ-U — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
36 equivalents compatible with the Denso W14EXZ-U spark plug
No equivalent for this brand selection.
What can replace a Denso W14EXZ-U spark plug?
The Denso W14EXZ-U is interchangeable with: Bosch WR8DP, Champion RN14PMP5, Denso W16EPU10, Bosch WR9LP, Bosch WR8LP+, Denso W14EXRZ-U. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso W14EXZ-U?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Very hot, Resistor No, Seat Flat (gasket), Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.