Equivalents for the Denso spark plug W11EPRU
The Denso W11EPRU spark plug with thread 14 mm, hex size 13/16″ (20,8 mm), tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), heat range very hot, reach 19.0 mm, resistor type (RFI-suppressed). Here are its 12 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Denso W11EPRU spark plug
- Resistor
- Yes
- Tip
- Projected
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso W11EPRU — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
12 equivalents compatible with the Denso W11EPRU spark plug
No equivalent for this brand selection.
What can replace a Denso W11EPRU spark plug?
The Denso W11EPRU is interchangeable with: Denso W22TT, Master Sport USERIEMS19, Bosch +12, Denso W22EPRU, Denso W22EPR-U, Bosch 7995. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso W11EPRU?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Very hot, Resistor Yes, Seat Flat (gasket), Tip Projected, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.