Equivalents for the Denso spark plug T20EP
Denso T20EP, a spark plug — heat range hot, hex size 16 mm (5/8″), tightening torque fonte 10–15 N·m · alu 10–12 N·m — ou 180° (½ tour), reach 19.0 mm, thread 10 mm. Here are its 17 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Denso T20EP spark plug
- Resistor
- No
- Tip
- Projected
- Torque
- fonte 10–15 N·m · alu 10–12 N·m — ou 180° (½ tour)
Buy this spark plug Denso T20EP — best retailers
Buy a spark plug wrench 16 mm (5/8″) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
17 equivalents compatible with the Denso T20EP spark plug
No equivalent for this brand selection.
What can replace a Denso T20EP spark plug?
The Denso T20EP is interchangeable with: Champion S7YCC, Beru 00016307000001, Valeo C10HC, Champion S7YCC04, Champion S279YC101, Champion OE050. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso T20EP?
Spark plug wrench 16 mm (5/8″), Thread 10 mm, Reach 19.0 mm, Heat range Hot, Resistor No, Seat Flat (gasket), Tip Projected, Torque fonte 10–15 N·m · alu 10–12 N·m — ou 180° (½ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.