Equivalents for the Denso spark plug KJ20CR11(MAZDA)
The Denso KJ20CR11(MAZDA) spark plug with tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), heat range hot, thread 14 mm, reach 19.0 mm. Here are its 18 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Denso KJ20CR11(MAZDA) spark plug
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso KJ20CR11(MAZDA) — best retailers
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
18 equivalents compatible with the Denso KJ20CR11(MAZDA) spark plug
No equivalent for this brand selection.
What can replace a Denso KJ20CR11(MAZDA) spark plug?
The Denso KJ20CR11(MAZDA) is interchangeable with: Bosch FR7LCX, Champion RC10ECC, Denso K20CRL-11, Bosch FR8LCX, Bosch F7LCOR2, Champion RC9MCC4. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso KJ20CR11(MAZDA)?
Thread 14 mm, Reach 19.0 mm, Heat range Hot, Seat Flat (gasket), Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.