Equivalents for the Denso spark plug K29AZ
Denso K29AZ is a spark plug featuring thread 14 mm, hex size 16 mm (5/8″), heat range very cold, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), reach 19.0 mm. Here are its 18 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Denso K29AZ spark plug
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso K29AZ — best retailers
Buy a spark plug wrench 16 mm (5/8″) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
18 equivalents compatible with the Denso K29AZ spark plug
No equivalent for this brand selection.
What can replace a Denso K29AZ spark plug?
The Denso K29AZ is interchangeable with: Bosch F07DC, Champion C55A, Denso R03, Champion C57CX, Champion QC57C, Champion QC501V. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso K29AZ?
Spark plug wrench 16 mm (5/8″), Thread 14 mm, Reach 19.0 mm, Heat range Very cold, Seat Flat (gasket), Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.