Equivalents for the Denso spark plug K16PBR-S10
Denso K16PBR-S10, a spark plug with resistor type (RFI-suppressed), thread 14 mm, heat range very hot, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), hex size 16 mm (5/8″). All its 31 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Denso K16PBR-S10 spark plug
- Resistor
- Yes
- Tip
- Projected
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Denso K16PBR-S10 — best retailers
Buy a spark plug wrench 16 mm (5/8″) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
31 equivalents compatible with the Denso K16PBR-S10 spark plug
No equivalent for this brand selection.
What can replace a Denso K16PBR-S10 spark plug?
The Denso K16PBR-S10 is interchangeable with: NGK BKUR5ET-10, Bosch F 8 KTCR, Champion RC10VTYC4, NGK BKUR5ETC-10, Bosch FR 8 KTC, Bosch FR 8 LTC. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Denso K16PBR-S10?
Spark plug wrench 16 mm (5/8″), Thread 14 mm, Heat range Very hot, Resistor Yes, Seat Flat (gasket), Tip Projected, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.