Equivalents for the Champion spark plug N19C
The Champion N19C spark plug with thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), hex size 13/16″ (20,8 mm), heat range very hot, reach 19.0 mm, electrode nickel. Browse its 181 equivalents: compatible, interchangeable and replacement spark plugs across NGK, Bosch, Champion, Denso and many more.
Technical information Champion N19C spark plug
- Resistor
- no
- Tip
- standard
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Champion N19C — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
What can replace a Champion N19C spark plug?
The Champion N19C is interchangeable with: Bosch W9AC, Champion L10, Denso W14F, Bosch W10AC, Bosch WR8AP+, Bosch W8197|AC|609. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Champion N19C?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Very hot, Gap 1.0mm, Electrode Nickel, Resistor no, Seat Flat (gasket), Tip standard, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.