Equivalents for the Bosch spark plug W10AC
The Bosch W10AC spark plug : heat range very hot, hex size 13/16″ (20,8 mm), electrode nickel, reach 12.7 mm, thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour). All its 272 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch W10AC spark plug
- Resistor
- no
- Construction
- Super
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch W10AC — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
What can replace a Bosch W10AC spark plug?
The Bosch W10AC is interchangeable with: Bosch W81C, Champion L10, Denso W14F, Bosch W9AC, Bosch W145T, Bosch W145TI. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch W10AC?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 12.7 mm, Heat range Very hot, Electrode Nickel, Resistor no, Seat Flat (gasket), Construction Super, Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.