Equivalents for the Torch spark plug E10C
Torch E10C is a spark plug — tightening torque ou 120° (⅓ tour), heat range cold, thread 8 mm, hex size 13 mm (1/2″). Find its 28 compatible and interchangeable spark plugs: cross-references for NGK, Bosch, Champion, Denso and every brand.
Technical information Torch E10C spark plug
- Resistor
- No
- Torque
- ou 120° (⅓ tour)
Buy this spark plug Torch E10C — best retailers
Buy a spark plug wrench 13 mm (1/2″) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
28 equivalents compatible with the Torch E10C spark plug
No equivalent for this brand selection.
What can replace a Torch E10C spark plug?
The Torch E10C is interchangeable with: Bosch W4AC, Champion J11C, Denso W31FS, Bosch W06AS, Bosch W07AS, Champion L55C. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Torch E10C?
Spark plug wrench 13 mm (1/2″), Thread 8 mm, Heat range Cold, Resistor No, Seat Flat (gasket), Torque ou 120° (⅓ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.