Equivalents for the Sard spark plug SR31 ISO(PRO)
The Sard SR31 ISO(PRO) spark plug featuring thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), reach 19.0 mm, heat range very cold. 54 equivalents listed: interchangeable and compatible spark plugs across all brands — NGK, Bosch, Champion, Denso…
Technical information Sard SR31 ISO(PRO) spark plug
- Resistor
- no
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Sard SR31 ISO(PRO) — best retailers
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
54 equivalents compatible with the Sard SR31 ISO(PRO) spark plug
No equivalent for this brand selection.
What can replace a Sard SR31 ISO(PRO) spark plug?
The Sard SR31 ISO(PRO) is interchangeable with: Bosch F08CS, Champion C55, Denso K29A-Z, Bosch F09CS, Champion C57, Champion C53C. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Sard SR31 ISO(PRO)?
Thread 14 mm, Reach 19.0 mm, Heat range Very cold, Gap 1.0mm, Resistor no, Seat Flat (gasket), Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.