Equivalents for the NGK spark plug BPR5FS-15
NGK BPR5FS-15, a spark plug : heat range very hot, thread 14 mm, electrode nickel, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), hex size 13/16″ (20,8 mm). Here are its 14 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information NGK BPR5FS-15 spark plug
- Resistor
- yes
- Tip
- tapered seat
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug NGK BPR5FS-15 — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
14 equivalents compatible with the NGK BPR5FS-15 spark plug
No equivalent for this brand selection.
What can replace a NGK BPR5FS-15 spark plug?
The NGK BPR5FS-15 is interchangeable with: Bosch HR 8 BCY, Champion RV 12 YC6, Denso T 16 PR-U 15, Champion RBL 11 Y6, Champion RBL 13 Y6, Denso D 65. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the NGK BPR5FS-15?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Heat range Very hot, Gap 1.5mm, Electrode Nickel, Electrode type Platinum, Resistor yes, Seat Flat (gasket), Tip tapered seat, Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.