Equivalents for the NGK spark plug BPR4FS-11
NGK BPR4FS-11 is an automotive spark plug : hex size 13/16″ (20,8 mm), heat range very hot, thread 14 mm, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), electrode nickel. Here are its 21 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information NGK BPR4FS-11 spark plug
- Resistor
- yes
- Tip
- tapered seat
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug NGK BPR4FS-11 — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
21 equivalents compatible with the NGK BPR4FS-11 spark plug
No equivalent for this brand selection.
What can replace a NGK BPR4FS-11 spark plug?
The NGK BPR4FS-11 is interchangeable with: NGK UR4, Bosch HR9BC+, Champion RV 15 YC4, Bosch HR 10 BCX, Champion RV15YC4/T10, Champion RV 15 YC4 /T04. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the NGK BPR4FS-11?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Heat range Very hot, Gap 1.1mm, Electrode Nickel, Electrode type Platinum, Resistor yes, Seat Flat (gasket), Tip tapered seat, Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.