Equivalents for the Champion spark plug N19V
The Champion N19V spark plug — thread 14 mm, reach 19.0 mm, heat range cold, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), hex size 13/16″ (20,8 mm). 15 equivalents listed: interchangeable and compatible spark plugs across all brands — NGK, Bosch, Champion, Denso…
Technical information Champion N19V spark plug
- Resistor
- no
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Champion N19V — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
15 equivalents compatible with the Champion N19V spark plug
No equivalent for this brand selection.
What can replace a Champion N19V spark plug?
The Champion N19V is interchangeable with: Bosch W2CC, Champion QN19V, Torch F10YC, Champion UN19V, ACDelco SV4XL, ACDelco SVB4XL. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Champion N19V?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0 mm, Heat range Cold, Resistor no, Seat Flat (gasket), Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.