Equivalents for the Bosch spark plug WR9EC3
Bosch WR9EC3, a spark plug featuring heat range medium, electrode nickel, hex size 13/16″ (20,8 mm), tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, reach 19.0–20.5 mm. Here are its 53 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Bosch WR9EC3 spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR9EC3 — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
53 equivalents compatible with the Bosch WR9EC3 spark plug
No equivalent for this brand selection.
What can replace a Bosch WR9EC3 spark plug?
The Bosch WR9EC3 is interchangeable with: Bosch W9AO, Champion H10, Denso W14L, Champion H11, Champion H12, Champion H10C. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR9EC3?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0–20.5 mm, Heat range Medium, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.