Equivalents for the Bosch spark plug WR8EP
Bosch WR8EP is a spark plug featuring heat range very hot, electrode platinum, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, reach 19.0–20.5 mm, hex size 13/16″ (20,8 mm). Here are its 16 cross-references: equivalent, compatible and replacement plugs from NGK, Bosch, Champion, Denso and other makers.
Technical information Bosch WR8EP spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR8EP — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
16 equivalents compatible with the Bosch WR8EP spark plug
No equivalent for this brand selection.
What can replace a Bosch WR8EP spark plug?
The Bosch WR8EP is interchangeable with: Champion RJ8C, Torch G6RC, LD G5RC, Champion RJ6C014, Champion RJ8C/014, Champion RJ8C/T04. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR8EP?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 19.0–20.5 mm, Heat range Very hot, Electrode Platinum, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.