Equivalents for the Bosch spark plug WR8DX
Meet the Bosch WR8DX spark plug : hex size 13/16″ (20,8 mm), tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm, heat range very hot, reach 18.5–21.5 mm, electrode nickel. All its 72 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WR8DX spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Terminal
- Special design
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR8DX — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
What can replace a Bosch WR8DX spark plug?
The Bosch WR8DX is interchangeable with: Bosch WR8LP+, Champion OE049B04, Denso W16TT, Bosch SUPER+22, Bosch SUPERplus22, Denso W16EPRU11. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR8DX?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Very hot, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Terminal Special design, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.