Equivalents for the Bosch spark plug WR8DP1
Bosch WR8DP1, a spark plug featuring thread 14 mm, reach 18.5–21.5 mm, heat range very hot, tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), hex size 13/16″ (20,8 mm), electrode platinum. Browse its 28 equivalents: compatible, interchangeable and replacement spark plugs across NGK, Bosch, Champion, Denso and many more.
Technical information Bosch WR8DP1 spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR8DP1 — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
28 equivalents compatible with the Bosch WR8DP1 spark plug
No equivalent for this brand selection.
What can replace a Bosch WR8DP1 spark plug?
The Bosch WR8DP1 is interchangeable with: Bosch WR8LP+, Denso IW16, Brisk LR17YS, Denso VW16, Denso IW16TT, Denso PW16TT. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR8DP1?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Very hot, Electrode Platinum, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.