Equivalents for the Bosch spark plug WR8DCW
Bosch WR8DCW is a spark plug : reach 18.5–21.5 mm, electrode nickel, heat range hot, hex size 13/16″ (20,8 mm), tightening torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour), thread 14 mm. All its 13 replacement references: compatible and interchangeable equivalents — NGK, Bosch, Champion, Denso…
Technical information Bosch WR8DCW spark plug
- Resistor
- yes
- Ground electrodes
- 1
- Torque
- fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Buy this spark plug Bosch WR8DCW — best retailers
Buy a spark plug wrench 13/16″ (20,8 mm) wrench
Partner links: a purchase made through these links may earn us a commission, at no extra cost to you.
13 equivalents compatible with the Bosch WR8DCW spark plug
No equivalent for this brand selection.
What can replace a Bosch WR8DCW spark plug?
The Bosch WR8DCW is interchangeable with: Beru 14 R-9 DU, Splitfire CC006E, Bosch +27, Beru Z 9, Bosch 0 242 225 624, Autolite 65. These spark plugs share the same mounting (thread, seat) and heat range.
What are the specifications of the Bosch WR8DCW?
Spark plug wrench 13/16″ (20,8 mm), Thread 14 mm, Reach 18.5–21.5 mm, Heat range Hot, Gap 0.95mm, Electrode Nickel, Resistor yes, Seat Flat (gasket), Ground electrodes 1, Torque fonte 25–35 N·m · alu 25–30 N·m — ou 180°–240° (½–⅔ tour)
Cross-references and specifications are provided for guidance only. The wrench size can vary by brand, and some data is inferred from the plug code or an equivalent reference. Always check the vehicle manufacturer's recommendation before buying and fitting.